Laboratory and Process Control
Focusimple RF test Laboratory, equipped with advanced RF Experimental equipment, effectively tests coax cables' performance during R&D.
Focusimple have the capability to effectively test and verify the performance, parameters, and indicators of coax cables (how to test a coax cable is a key process here) as well as radio frequency connectors during the research and development phase. This laboratory provides the necessary power for the development of new technology products and ensures product quality.
When compared with the same industry in terms of the accuracy, precision, and energy-saving features of the inspection equipment, our RF test Laboratory stands at a domestic advanced and first-class level. The fixed asset investment in this laboratory accounts for over 20% of the company's total fixed asset investment. These high-tech integrated RF Experimental equipment will further bolster the company's robust research and development solutions for microwave radio frequency products.
Laboratory Testing Capabilities
Gauss meter
Model：GMR63
Manufacturer：COLIY
Accuracy/Range：±0.8%
Test item：Using Fourier Analysis for Measuring Alternating Magnetic Fields (RMS Value and Spectrum Analysis)
Programmable Image Measuring Instrument
- Model：VMC222
Manufacturer：TZTEK
Accuracy/Range：0.0001mm
Test item：Provide imaging metrology tools, combine element measurements, measure geometric and positional errors, and programmatic ways to achieve automatic scanning and data export for product measurements.
12KW RF Power Detection System
- Model：RPJ12013A-T4/NN/B
Manufacturer：INJET
Accuracy/Range：±1%
Test item：Power test
Network Analyzer
Model: N5230C / AV3672E
Manufacturer: Keysight / The 41st Research Institute
Accuracy/Range: 10MHz~40GHz/±2% / 10MHz~67GHz/±2%
Test item: Product Performance Test
Gas Chromatography Mass Spectrometry
Model: GC-MS6800
Manufacturer: Skyray
Accuracy/Range: MDL30mg/kg
Test item: Environmental Test
X-ray Fluorescence Spectrometer
Model: EDX1800E
Manufacturer: Skyray
Accuracy/Range: MDL2mg/kg
Test item: Environmental Test
High and low temperature Alternating Test Chamber
Model: YSGJW-150L
Manufacturer: Shanghai Yishuo
Accuracy/Range: -60 ℃~+150 ℃/±1℃
Test item: Temperature Test
High Temperature Oven
Model: XMT-7000
Manufacturer: AUTDA
Accuracy/Range: +250 ℃/±2℃
Test item: Temperature Test
Salt Spray Test Chamber
Model: ZH-BSH-60
Manufacturer: Sailham
Accuracy/Range: 37°±2 ℃/sedimentation rate1.0-2.0mL/(H.80cm2)
Test item: Salt Spray Test
Contact Resistance Tester
Model: RK2516A
Manufacturer: Meiruike
Accuracy/Range: 1μΩ-200KΩ ±0.05%
Test item: Contact Resistance Test
Two Dimension Measuring Instrument
Model: QH3020
Manufacturer: LongTian Instrument
Accuracy/Range: 0.001mm
Test item: Size Measurement
Tensile Tester
Model: TH-8203S
Manufacturer: Tophung
Accuracy/Range: 2-200Kg/ 0.5-50Kg±0.5%
Test item: Tensile Test
Automatic Load Tester
Model: JISC/JIC-M50N
Manufacturer: JISC
Accuracy/Range: 0.005
Test item: Elasticity and Pressure Test
Elongation Tensile Tester
Model: SC-5A
Manufacturer: Xiangfeng Instrument
Accuracy/Range: elongation：0-80%/±2%
Tensile：≤2000N/±1NTest item: Tensile Test
Bending and Swing Tester
Model: FL-8634B
Manufacturer: Bowen Instrument
Accuracy/Range:
Test item: Bending Durability Test
Plug and Pull Life Tester
Model: BC-642
Manufacturer: Bowen Instrument
Accuracy/Range:
Test item: Plug and Pull Life Test
Main Business
According to the EU RoHS directive, testing and verification services for products with restricted chemical substances
According to GJB973A/GJB1215A/GJB681, conduct relevant qualification tests, reliability tests, environmental tests and periodic tests on RF coaxial cables, RF coaxial cable assemblies, and RF coaxial connectors.
Process Control
The establishment of the GJB quality management system by the company involves three major areas: raw material management, process control, and production services, and takes the four major processes of product realization, process management, monitoring and measurement, and analysis as the main line. In the process of product realization, the required process is carried out. Identify, determine the sequence and interaction between the processes, specify the criteria and methods for controlling these processes, monitor, measure and manage the processes in strict accordance with the requirements of the standard, and ensure that the quality of the final product meets the requirements of the standard.
